Invacare 9000 XT - Manual (Page 50)

9000 Series 50 Part No. 1056953
RECLINER SECTION 9
RECLINER
REMOVING/INSTALLING THE REAR WHEELS
NOTE: If replacing the same size rear wheel, this procedure is performed.
WARNING
If changing the size of the rear wheel or if a change in the SEAT-TO-
FLOOR HEIGHT is desired, this procedure must be performed by a
qualified technician.
WITH PATIENT OPERATED WHEEL LOCKS (FIGURE 8)
1. Remove the axle mounting screw and
locknut that secure the patient oper-
ated wheel lock, spacers, and rear
wheel to the wheelchair frame.
2. Secure rear wheel, patient operated
wheel lock, and spacers to wheelchair
frame with axle mounting screw and
locknut. Securely tighten.
WITH ATTENDANT OPERATED WHEEL LOCKS (FIGURE 9)
1. Remove the axle mounting screw and
locknut that secure the rear wheel and
spacer to the wheelchair frame.
2. Remove rear wheel from side frame.
3. Secure rear wheel and spacer to
wheelchair frame with axle mounting
screw and locknut. Securely tighten.
Spacers
Axle
Mounting
Screw
Patient Operated
Wheel Lock
Rear Wheel
Wheelchair Frame
Locknut
FIGURE 8 - REMOVING/
INSTALLING THE REAR WHEELS -
WITH PATIENT OPERATED
WHEEL LOCKS
FIGURE 9 - REMOVING/
INSTALLING THE REAR WHEELS -
WITH ATTENDANT
OPERATED WHEEL LOCKS
Locknut
Wheelchair Frame
Rear Wheel
Axle
Mounting
Screw
Spacer