Invacare 9000 XT - Manual (Page 20)

9000 Series 20 Part No. 1056953
Folding "Hammock or Sling Seat" Models.
1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar from the
side frame. Refer to STORING/REPLACING THE SPREADER BAR in SECTION 9 of
this manual.
2. Swing footrest/legrest in locked position to the front of the wheelchair.
3. Pivot footplates upward to vertical position.
4. With both hands, grasp the middle of the seat upholstery at the front and back edge
and lift up.
5. Continue to close the wheelchair by grasping the armrest furthest from you and
pulling the armest towards you.
SOLID-SEAT MODELS
"HAMMOCK OR SLING SEAT"
MODELS
Folding Solid-Seat Models.
1. From behind the wheelchair, grasp the right hand edge of the solid seat.
2. Remove the footrests/legrests from the wheelchair.
3. Raise the seat to the hinged side.
4. With both hands, grasp the middle of the seat upholstery at the front and back edge
and lift up.
5. Continue to close the wheelchair by grasping the armrest furthest from you and
pulling the armest towards you.
GENERAL
GUIDELINES
SECTION 1 GENERAL GUIDELINES
GENERAL
GUIDELINES