Invacare 9000 XT - Manual (Page 22)

9000 Series 22 Part No. 1056953
SECTION 2 SAFETY INSPECTION
SAFETY
INSPECTION
TROUBLESHOOTING
MAINTENANCE
MAINTENANCE SAFETY PRECAUTIONS MAINTENANCE SAFETY PRECAUTIONS MAINTENANCE SAFETY PRECAUTIONS MAINTENANCE SAFETY PRECAUTIONS MAINTENANCE SAFETY PRECAUTIONS
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attachment hardware is tightened securely - otherwise, injury or damage
may result.
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause
damage to the frame tubing.
SUGGESTED MAINTENANCE PROCEDURES
1. Before using your 9000 Series wheelchair, make sure all nuts and bolts are tight. Check
all parts for damage or wear and replace. Check all parts for proper adjustment.
2. 9000 SL/9000XT ONLY - Keep quick-release axles free of dirt and lint to ensure
positive locking and proper operation. Refer to ADJUSTING THE QUICK-RELEASE
AXLE in SECTION 6 of this manual.
3. 9000 SL/9000XT ONLY - Oil quick-release axles at least once (1) a month (3-in-1
oil® or equivalent).
WARNING
DO NOT use the wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may
cause the tire to explode and cause bodily harm.
4. If tires are pneumatic, recommended tire pressure is listed on the sidewall of the
tire.
Chair Chair Sluggish Squeaks
Veers 3 Turn or Caster and Looseness
Right/Left Wheels Performance Flutter Rattles in Chair SOLUTIONS
X X X X Check tires for correct
and equal pressure.
X X X X Check for loose nuts and bolts.
X X X Check caster headtube angle.
X X Check that rear wheels are
equally spaced away from seat
frame