Invacare 9000 XT - Manual (Page 55)

Part No. 1056953 55 9000 Series
INSTALLING THE SOLID FOLDING SEAT (FIGURE 2)
1. Remove the existing seat upholstery from the wheelchair. Refer to REPLACING
THE SEAT UPHOLSTERY in SECTION 5 of this manual.
2. Slide solid folding seat with the seat
brackets attached over the
crossbraces.
3. Position the seat brackets in between
the H-blocks of the seat frame.
4. Push the seat frame down and into the
H-blocks making sure the solid folding
seat brackets are positioned in-be-
tween the H-blocks.
5. Place the other side of the solid folding
seat (seat hooks) over the opposite
side crossbrace.
FIGURE 2 - INSTALLING THE
SOLID FOLDING SEAT
Seat Bracket
Washer
Phillips Screw
Bottom
Solid Folding
Seat
Seat Hook
OPTIONS SECTION 10
OPTIONS
CLEANING
WARNING
The user and O
2
cylinder must be removed from the wheelchair when
cleaning the O
2
holder. Otherwise, injury or damage may occur if cleaning
agents come in contact with the O
2
regulator.
1. Remove the user, any I.V. medication and the O
2
cylinder from the wheelchair.
2. The telescoping I.V. rod/O
2
holders clean easily with any household glass type cleaner.
3. After the cleaning solution has dried, it is safe for the user to re-occupy the wheel-
chair.
INSTALLING THE CRUTCH AND CANE CARRIER (FIGURE 3)
WARNING
Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, Ensure items are securely placed
into the base. Also ensure that there is no intereference with folding the
wheelchair, the rear wheels, or the swing-back arms.
Strap MUST be securely fastened while carrying items.
Never insert or remove items while wheelchair is moving.