Juniper Networks M5 - Manual (Page 133)

Replace Routing Engine Components
On some routers, the accessory box includes a plastic PC card storage case that you can affix
to the router chassis for easy access to the PC card. shows the recommended installation
location for the case and how to insert the PC card into the case.
Velcro fastener PC card case
g003017
The appearance and position of electronic components or the PC card
slot on your Routing Engine might differ from the figures in this section.
These differences do not affect Routing Engine installation and removal
or functionality.
The software on a PC card is loaded only onto the Routing Engine into which
the PC card is inserted. It is not automatically copied to the other Routing
Engine.
To remove and insert a PC card, perform the following procedures:
•
Remove the PC Card on page 113
•
Insert the PC Card on page 114
Remove the PC Card
The PC card is inserted in the slot labeled PC CARD in the Routing Engine faceplate. To
remove the PC card, follow this procedure (see Figure 40):
1. Press the eject button located next to the PC card slot in the Routing Engine faceplate.
Note that the PC card slot might be located in a different position from that shown in
Figure 40.
Replace Hardware Components 113