Maintain the routing engine – Juniper Networks M5 User Manual

Page 99

Advertising
background image

Maintain the Routing Engine

•

Verify that the air flow in and out of cooling system components is not obstructed.

Maintain the Routing Engine

The Routing Engine installs into a slot in the Forwarding Engine Board (FEB) at the
rear of the chassis, as shown in Figure 3. To maintain the Routing Engines, issue the
CLI show chassis routing-engine command on a regular basis to check the status of the
Routing Engine:

user@host> show chassis routing-engine

Routing Engine status:

Temperature

35 degrees C / 95 degrees F

DRAM

768 MB

Memory utilization

16 percent

CPU utilization:

User

0 percent

Background

0 percent

Kernel

0 percent

Interrupt

0 percent

Idle

100 percent

Model

RE-2.0

Serial ID

f1000004f91d2901

Start time

2003-05-01 15:07:12 PDT

Uptime

3 days, 9 hours, 4 minutes, 5 seconds

Load averages:

1 minute

5 minute

15 minute

0.04

0.01

0.00

For further description of the output from the command, see the JUNOS Internet Software
Operational Mode Command Reference: Protocols, Class of Service, Chassis, and Management
.

Maintain Hardware Components

79

Advertising
This manual is related to the following products: