Juniper Networks M5 - Manual (Page 134)

Replace Routing Engine Components
2. When the PC card pops partially out of the slot, grasp the card and pull it straight
out of the slot.
Figure 40: Remove the PC Card
1332
Eject button
Insert the PC Card
To insert the PC card, follow this procedure (see Figure 41):
1. Orient the PC card with the Juniper Networks logo facing in the direction specified on
the Routing Engine faceplate. Insert the card into the slot.
2. Press the card firmly all the way into the slot. Note that the PC card slot might be
located in a different position from that shown in Figure 41.
114 M5 and M10 Internet Routers Hardware Guide