JVC VR-509E - Manual (Page 11)

11
Getting Started
[0/HDD (DVD)]
HDD
⇔ DVD Button and indicator
Press this button to switch operations between DVD and
HDD. The indicator is illuminated when in DVD operations.
„ [0] Button
Sets the value to 0.
Status indicators
„ WARNING indicator
Illuminated when a warning is in effect.
„ ALARM indicator
Illuminated during ALARM REC. The indicator will flash in
red when ALARM REC has been completed.
„ HDD indicator
Illuminated during built-in HDD access.
„ SPOT indicator
Illuminated during SPOT OUT operations.
„ LOCK indicator
Illuminated during OPERATION LOCK.
[FUNCTION] Button
Press and hold this button followed by pressing the [PLAY
STOP] button to adjust the seconds of the clock. (Page 19)
[MENU] Button
Displays the menu screen, and returns to the normal
screen from the menu screen. (Page 17)
[CANCEL] Button
• Cancels the warning light and silences the warning
buzzer.
• Cancels the program timer setting and the record
reservations. (Page 38, 39)
[ALARM RESET] Button
Cancels the alarm recording or the motion detect is
prohibited for 10 seconds.
Extinguishes the alarm indicator and silences the buzzer
when an alarm indicator in effect.
REC/PLAY Operations Buttons
„ [REC/STOP] Button
Starts and ends recording.
Press for at least two consecutive seconds to stop
recording. (Page 29)
„ [PLAY STOP] Button
Stops playback and still image playback. When recording
and playing back simultaneously, playback is stopped and
recording is activated.
„ [PLAY/PAUSE] Buttons and indicators
Displays the playback menu (EVENT SEARCH screen)
during live image display and recording.
Pauses when pressed during playback.
Resumes playback when pressed in the PAUSE mode.
(Page 40)
[OPEN/CLOSE] DVD Open/Close Button
Opens and closes the DVD tray.
REC indicator
Illuminated during recording. (Page 29)
Shuttle Dial
Changes the playback speed during playback and PAUSE
mode. (Page 43)
Jog Dial
Plays back a single frame in the normal or reverse direction
during playback and PAUSE mode. (Page 43)
[SKIP] Search Button
Jumps to the oldest record image or the latest record
image of the hard disk when pressed in the playback menu
mode.
Starts SKIP JUMP by the mode set in the playback menu
when pressed in the playback mode. (Page 44)
Part Names and Functions (Front Panel) (continued)
OPERATE
TIMER/MODE
SERIAL
FUNCTION MENU CANCEL REC/STOP PLAY STOP
SKIP
REC
PLAY/PAUSE
REW
OPEN/CLOSE
FF
ALARM
RESET
SPLIT
SEQUENCE
WARNING
ALARM
SPOT
HDD
LOCK RETURN
SET
VIDEO
OUT
AUDIO
OUT
10 11 12 13 14
15
9
16
17
18
19
8
8
9
10
11
12
13
14
15
16
17
18
19