Troubleshooting (continued) – JVC VR-509E User Manual
Page 99
99
Explanations
Other Problems
Troubleshooting (continued)
Symptom
Cause and Recovery
Refer to
Page
Power cannot be turned on.
→ Check to ascertain that the power cable has been plugged in correctly.
–
[REC/STOP] and [PLAY/
PAUSE] buttons do not work.
→ Check to ascertain if the OPERATION LOCK is activated.
→ Check to ascertain if the TIMER STANDBY mode is activated.
Playback image is not
displayed on the monitor.
→ Check the monitor connection.
→ Select a camera that has a recorded image.
Unable to start program
recording using the Program
Timer
→ Check the DATE/TIME settings.
→ Check to ascertain if the TIMER STANDBY mode is activated.
→ Check the TIMER PROGRAM.
Menu screen is not displayed.
→ Check to ascertain if the OPERATION LOCK is activated.
→ Check to ascertain if the TIMER STANDBY mode is activated.
No on-screen display of date/
time and title.
→ Check to ascertain that the settings on the [ONSCREEN MODE] screen
are set to “ON”.
Date/Time is not recorded.
→ Check the DATE/TIME settings.
[TIMER] indicator blinks.
•
The PROGRAM TIMER has not been reserved, or there is no recording
reservation that can be executed.
→ Check the PROGRAM TIMER.
•
There is no space left on the hard disk.
→ Format the hard disk to create recording space or set [REPEAT REC] in
the [OPERATION] menu to values other than “OFF”.
Unable to play back audio
sound.
→ Make recordings with the [AUDIO REC] in the [RECORD SETUP] menu
set to “ON”.
* Sound audio cannot be recorded when the [F.RATE] setting on the [REC
PATTERN SET] menu has been specified as “0.08” or “0.2”.
Unable to execute Skip Jump
or Direct Jump
→ Check the DATE/TIME setting.
→ Check the SKIP setting.
The screens continue to
advance when the [SKIP]
button is pressed.
→ Check to determine that the [SKIP PLAY] parameter on the [SKIP SET]
menu is not set to anything other than [OFF].
Cannot mount rack fittings
→ Rack mount fittings are optional. Please consult the nearest JVC dealer
for details.
–