JVC VR-509E - Manual (Page 20)

Installation and Preparation
20
1. Press the [MENU] button.
• Open the menus in accordance with the instructions
provided in MENU Screen Operations (page 17) in the
sequence of [MENU]
→ [CAMERA SETUP].
• The [CAMERA SETUP-1] screen will be displayed.
* The settings cannot be amended during recording.
2. Select “CONTINUE” on the confirmation screen with
the use of the [ W/X] keys, and then press the [SET]
button.
• The confirmation screen will close.
* Select “ABORT” and press the [SET] button to return to
the top menu.
3. Select your desired item with [ S/T], and then press
[–/+] to change the value settings.
Settings
CONNECT, DISCONNECT:
Set the camera input that is to be used for
recording at “CONNECT”, and all other cameras
at “DISCONNECT”.
SMOOTH: Set and record with a total recorded frame count
of 100 images per second, and a picture size of
352 x 288 pixels.
HIGH-RESOLUTION:
Set and record with a total recorded frame count
of 50 images per second, and a picture size of
720 x 288 pixels.
4. Press the [SET] button.
• The [CAMERA SETUP-2] screen will be displayed.
5. Select your desired item with [ S/T], and then press
[–/+] to change the value settings.
Settings
1DAY, 3DAYS, 5DAYS, 1WEEK, 2WEEKS, 3WEEKS,
1MONTH, 2MONTH, 3MONTH:
Set the period for which the recorded images are to
be stored on the hard disk based on the preset
recorded image mode and the number of cameras
connected.
* This storage period only acts as a guidelines, as the actual
period of storing images may differ depending on
amendments to the frame rate, quality and other settings in
[CAMERA SETUP-3]. (Refer to the section on “Recording
Duration” on page 110 for further details on the storage
period for recorded images.)
ON, OFF: Set whether to record sound audio when in the
NORMAL REC and ALARM REC modes.
Set the action when the remaining capacity in the hard disk
becomes empty.
OFF: Stops recording.
ALARM LOCK: Continues recording over old recordings.
However, recordings made in the ALARM REC
mode will not be overwritten.
ALL: Continues recording over old recordings.
Installation Settings
CAMERA SETUP-1
CAMERA1 to 9
PRIORITY
CAMERA SETUP
RECORD SETUP
OPERATION MENU
LIVE PICTURE
Button operation explanation
FUNCTION : USER GUIDANCE
SET UP
CURSOR
UPDATE/NEXT
BACK
3.
Confirmation
screen
2.
CAMERA SETUP-1
CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
CAM 6
CAM 7
CAM 8
CAM 9
PRIORITY CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
CONNECT
SMOOTH
CONTINUE ABORT
The current setting is changed when preserving it.
CAMERA SETUP-2
DURATION
AUDIO REC
REPEAT REC
When the setting has been made for a specific number of
cameras, it is only possible to amend [CAMERA SETUP-1].
In order to amend the subsequent cameras, the [REC
PATTERN SET] data (the F.RATE, QLY, and M.DET
settings for NORMAL REC/ALARM REC) that use
[STANDARD] or [REC PATTERN 1 to 9] must be reset.
(See “Setting the REC PATTERN SET” on page 31)
CAUTION
DURATION
AUDIO REC
REPEAT REC
CAMERA SETUP-2
1 WEEK
OFF
OFF 5.