JVC VR-509E - Manual (Page 49)

49
Useful Features
1. Press the [MENU] button.
• The [MENU]
→ [OPERATION MENU] → [ONSCREEN/
OPERATION]
→ [BUZZER] screens will be displayed in
this sequence in accordance with the [MENU Screen
Operations] explained on page 17.
2. Select your desired item with the [ S/T] keys, and then
change the value of the setting with [–/+].
Settings
Set value: OFF, ON
Set value: OFF, ON
OFF: The buzzer will not sound.
ALL: The buzzer will sound whenever any type of warning is
issued.
USER: Selects whether or not to set the buzzer for sounding
depending on the warning type.
Warning Types:
VIDEO LOSS, HDD ERROR, FAN MOTOR ERROR,
PASSCODE ERROR, POWER FAIL, REC STOP
Set value:
OFF, ON
* The buzzer will not sound even when the warning
buzzer parameter has been set at “ON” if the
[WARNING] setting on the [ON-SCREEN MODE]
menu has been set at “OFF”.
* The buzzer will not sound even when the REC STOP
buzzer parameter has been set at “ON” if the [REC TO
STOP MESSAGE] setting on the [ON-SCREEN
MODE] menu has been set at “OFF”.
Set value: OFF, ON
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ W/X] keys, and then press
[SET].
1. Press the [MENU] button.
• The [MENU]
→ [OPERATION MENU] → [ONSCREEN/
OPERATION]
→ [REAR TERMINAL] screens will be
displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
2. Select your desired item with the [ S/T] keys, and then
change the value of the setting with [–/+].
Settings
Recording will start/stop with input into the [EXT REC IN]
terminal on the rear panel.
OFF: Signals not output.
ALL: Signals output during recording.
ALARM REC: Signals only output during alarm recording.
STOP REC: Signals output when recording stopped.
OFF: Signals not output.
ALL: Signals output when warnings are issued.
USER: Selects whether or not to output signals depending on
the warning type.
Warning Types:
VIDEO LOSS, HDD ERROR, FAN MOTOR ERROR,
PASSCODE ERROR, POWER FAIL
Set value:
OFF, ON
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ W/X] keys, and then press
[SET].
Buzzer Setup
ALARM
HDD FULL
WARNING
BUTTON
BUZZER
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ALARM
HDD FULL
WARNING
VIDEO LOSS
HDD ERROR
FAN MOTOR ERROR
PASSCODE ERROR
POWER FAIL
REC STOP
BUTTON
2.
REAR TERMINAL
EXT REC (See page 29)
REC OUT
WARNING OUT
REAR TERMINAL
2.
EXT REC
REC OUT
WARNING OUT
VIDEO LOSS
HDD ERROR
FAN MOTOR ERROR
PASSCODE ERROR
POWER FAIL OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF