Troubleshooting (continued) – JVC VR-509E User Manual
Page 98
Explanations
98
Problems with the DVD
If the following messages are displayed during DVD exporting or DVD playback, press the [CANCEL] button to delete the message,
and then check the cause of the problem.
Problems with Flash Memories
Troubleshooting (continued)
On-screen Message
Cause and Recovery
Refer
to
Page
“DVD export data retrieval was
discontinued (D-01)”
“DVD export data retrieval was
discontinued (D-02)”
“DVD export data retrieval was
discontinued (D-03)”
•
No relevant retrieval data.
•
The result of the search exceeds the disc capacity.
•
Search processing error.
“DVD export data conversion
was discontinued (D-01)”
“DVD export data conversion
was discontinued (D-02)”
“DVD export data conversion
was discontinued (D-03)”
•
No relevant conversion data.
•
The result of the conversion exceeds the disc capacity.
•
Conversion processing error.
“DVD export data disc making
was discontinued (D-01)”
“DVD export data disc making
was discontinued (D-02)”
“DVD export data disc making
was discontinued (D-03)”
•
Disc creation failed.
→ There is a chance that an error occurred on the relevant disc.
•
The inserted disc is not supported.
•
Disc deletion failed.
→ There is a chance that an error occurred on the relevant disc.
“There is no file can be
reproduced in DVD (D-01)”
“There is no file can be
reproduced in DVD (D-02)”
“There is no file can be
reproduced in DVD (D-03)”
•
The directory for list creation does not exist.
•
The file for list creation does not exist.
•
List creation failed.
On-screen Message
Cause and Recovery
Refer
to
Page
“Still picture preservation
failure”
“Set data save failed”
•
The flash memory was disconnected during writing operations.
•
The flash memory is set for read-only operations.
→ Disable the read-only function.
•
The flash memory does not have sufficient capacity.
→ Increase the available capacity, or connect a new flash memory.
•
Sufficient capacity is available, but writing is not possible. (There are
limits to the number of files a USB flash memory can store in the root
directory.)
→ Either store the new file in a sub-directory, or delete some of the other
files.
“Set data of the USB flash
memory cannot be recognized”
•
The flash memory was disconnected during reading operations.
•
No menu setting data exists on the flash memory.
•
The VR-509 version does not match up with the menu setting data
version.
•
The menu setting data file is damaged.