JVC VR-509E - Manual (Page 65)

65
Connecting to a PC
z Viewing Live Images Using a PC (Page 69)
z Record Program Using a PC (Page 70)
z Viewing Playback Image Using a PC (Page 73)
z Useful Functions Using a PC (Page 76)
• Camera titles (Page 76)
• Mail Notification (Page 77)
• NTP server registration (Page 78)
• Downloading VR-509 Settings (Page 79)
• Uploading VR-509 Settings (Page 80)
z Changing a Network Settings (Page 82)
z Changing VR-509 Settings Using a PC (Page 83)
• OS: Windows XP Professional SP2 /
Windows XP Home Edition SP2
• CPU: Pentium III 1GHz and above
• Memory: 256 MB and above
• Monitor: XGA (1024 x 768 pixels) and above required
SXGA (1280 x 1024 pixels) recommended
* Supports Internet Explorer Ver. 6.0.
In addition, Internet Explorer 5.0 is not supported.
(Set Java Script and ActiveX control to [ENABLE] and Pop-
Up Block to [DISABLE].)
* See page 108 for details on activating ActiveX Control.
• The PC specifications are merely recommended examples
for using the application software with ease, and
operations are not guaranteed.
Even when the PC fulfils the necessary operating
conditions, its performance may vary between individual
users depending how the PC is used.
• Connect the PC to the hub and the VR-509 to the hub with
the use of straight LAN cables.
• Connect the PC to the VR-509 with the use of a crossover
LAN cable.
• Connect the PC to a line terminal device (router, etc.,) and the
VR-509 to a line terminal device with a straight LAN cable.
* Always used LAN cables that are rated Enhanced Category
5 or Category 6.
z Consult the network administrator when connecting to an
existing LAN line.
z A maximum of thirty-two live images can be viewed on
multiple PCs with each VR-509 unit.
z A maximum of one video playback image can be viewed
with each VR-509 unit.
z It is not possible to view both live images and playback
images at the same time.
You Can Do the Following
Minimum PC Specifications Required
• As the VR-509 is only equipped with an auto-
negotiation function, care must be taken when it is
connected to the full duplex fixed equipment.
• The VR-509 does not support functions that amend
NAT, NAPT (IP masquerade) or similar IP addresses,
or port numbers.
CAUTION
Connecting Using a LAN Cable
Connecting the Network (LAN)
Peer-to-Peer Connection
Connecting to Public Line Networks
The VR-509 supports WAN (Wide Area Networks).
AC IN 220V - 240V
50Hz/60Hz
WARNING: SHOCK HAZARD
-DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE-NE
PAS OUVRIR
LAN
Hub
100BASE-T
straight LAN cable
[LAN] terminal
AC IN 220V - 240V
50Hz/60Hz
WARNING: SHOCK HAZARD
-DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE-NE
PAS OUVRIR
100BASE-T cross LAN cable
[LAN] terminal
IP: 172.25.0.10
IP: 172.25.0.20
[LAN]terminal
Line terminal device
Line terminal device
Public line network
Establish the settings for the line terminal device in
accordance with the instructions provided for each
individual device.
MEMO
Connecting to a PC