JVC VR-509E - Manual (Page 48)

Useful Features
48
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of [MENU]
→ [OPERATION MENU] →
[ONSCREEN/OPERATION]
→ [OPERATION].
2. Select your desired item with [ S/T], and then change
the setting with [–/+].
Settings
BASIC: Cancels the lock with button operation.
PASSCODE (MODE1):Passcode input required to cancel lock.
PASSCODE (MODE2):The passcode and sub-passcode must
be entered to cancel this.
(Page 54 “Pass Code Setup”)
* The button operations selected with [OPERATION LOCK]
will be locked when [BASIC] or [PASSCODE (MODE 1)] have
been selected. All button operations will be locked when
[PASSCODE (MODE 2)] has been selected.
* Only “BASIC” can be set when nothing has been specified for
the passcode. “PASSCODE” cannot be specified.
The button operations that will be released are shown in the
following table.
OFF: Disables the “OPERATION LOCK”.
REC STOP: Some of the button operations are prohibited.
(See table 4)
ALL: All of the button operations are prohibited.
(See table 4)
USER: User can set the button operation to be prohibited
optionally. (See table 5)
Operation type:
REC STOP, PLAY, CHANGE SETTING, CHANGE
MONITOR, OPERATION, DVD
Selections:
ON, OFF
3. Press the [SET] button.
• A confirmation screen will be displayed.
4. Select [SAVE] with [
W/X], and then press the [SET]
button.
* Menu setup is possible even when the operation lock has
been activated when the [CHANGE SETTING] parameter on
the [USER] settings has been set at “OFF”. However, the
parameters related to the operation lock cannot be amended.
Amendments to the operation lock settings can only be made
after the operation lock has been cancelled.
Table 4: Buttons to be prohibited (REC STOP, ALL)
Table 5: Buttons to be prohibited (USER)
Setting OPERATION LOCK
OPE LOCK RELEASE
Release Method
Released Button
Operations
BASIC All locked button
operations
PASSCODE
(MODE1) Passcode Entry
PASSCODE
(MODE2)
Sub-passcode Entry Button operations un-
locked with the following
OPERATION LOCK.
OPERATION LOCK
OPERATION
RECOVERY REC
REC INDICATOR
REPEAT REC
OPE LOCK RELEASE
OPERATION LOCK
REC STOP
PLAY
CHANGE SETTING
CHANGE MONITOR
OPERATION
DVD PRIOR STATE
ON
ALL
BASIC
REC STOP
OFF
OFF
OFF
OFF
OFF
OFF
2.
Front Button REC STOP ALL
[REC]
[ALARM RESET]
DISABLE DISABLE
[STOP]
[PLAY/PAUSE]
[SHUTTLE DIAL]
[JOG DIAL]
[SKIP]
ENABLE DISABLE
[MENU] DISABLE DISABLE
[FUNCTION] ENABLE DISABLE
[KEYPAD 1-9]
[SPLIT]
[SEQUENCE]
ENABLE DISABLE
[OPERATE]
[TIMER/MODE]
DISABLE DISABLE
[CANCEL] ENABLE DISABLE
[HDD(DVD)/0]
[OPEN/CLOSE]
DISABLE DISABLE
Front Button Type
[REC]
[ALARM RESET]
REC STOP
[STOP]
[PLAY/PAUSE]
[SHUTTLE DIAL]
[JOG DIAL]
[SKIP]
PLAY
[MENU]
[FUNCTION] CHANGE
SETTING
[KEYPAD 1-9]
[SPLIT]
[SEQUENCE]
CHANGE
MONITOR
[OPERATE]
[TIMER/MODE]
[CANCEL]
OPERATION
[HDD(DVD)/0]
[OPEN/CLOSE]
DVD