JVC VR-509E - Manual (Page 124)

RS-232C Interface
124
• MONITOR MODE SENSE (DBH) [JVC-1]
Returns the status data for the monitor display settings.
MONITOR MODE SENSE Return Data
• MOTION DETECT SENSE (DCH) [JVC-1]
Returns the status data for the motion detection settings.
(Current operating mode status. The status at the time of
operations will be returned when in the timer mode.)
MOTION DETECT SENSE Return Data
• MONITOR OUT STATUS SENSE (DEH) [JVC-1]
Returns the status data for monitor output.
* Split-screen mode
000: 9 WAY, 001: QUAD-A, 010: QUAD-B,
011: QUAD-C, 101: 6 WAY, 110: Single screen
* Camera number
Displays the relevant camera number when a single-screen
monitor is in use. (0 to 9) Displays the top left-hand camera
number when split-screen monitors are in use.
• MAC SENSE (FCH) [JVC-1]
Acquires the MAC address (6 bytes).
3. Details of the Commands (continued)
3.4. SENSE Commands (continued)
DBH TXD
RXD
1st byte 2nd byte 3rd byte 7th byte
Not defined (fixed at “0”)
Monitor Display Settings 2/7
Monitor Display Settings 3/7
Monitor Display Settings 4/7 to 6/7
4 to 6 bit7 to 0 Contents the same as 3BYTE (cameras 3 to 8)
7
Automatic switch setting (camera 9):
0000: OFF, 0001: 1, 0010: 2, 0011: 3,
0100: 5, 0101: 10 (seconds)
3
Automatic switch setting (camera 2):
0000: OFF, 0001: 1, 0010: 2, 0011: 3,
0100: 5, 0101: 10 (seconds)
Automatic switch setting (camera 1):
0000: OFF, 0001: 1, 0010: 2, 0011: 3,
0100: 5, 0101: 10 (seconds)
1
Alarm detection display:
00: OFF, 01: Fixed, 10: Sequential
2
Quad display sequence time setting:
0001: 1, 0010: 2, 0011: 3, 0100: 5, 0101: 10 (seconds)
byte No. bit No.
Not defined (fixed at “0”) bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Monitor Display Settings 1/11
“1” output with VGA output at [ON].
Border color:
00: BLACK, 01: DARK GRAY, 10: GRAY, 11: LIGHT GRAY
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Monitor Display Settings 7/7
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Not defined (fixed at “0”)
Not defined (fixed at “0”)
7 6 5 4 3 2 1 0
0:Live
1:PLAY
Split-screen mode* Camera number*
DCH TXD
RXD
1st byte 2nd byte 3rd byte 9th byte
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Motion Detection Settings 2/9 to 9/9
2 to 9 bit7 to 0 Contents the same as 1BYTE (cameras 2 to 9)
1
Operation setting (camera 1):
00: OFF, 01: ON
Detection sensitivity (camera 1):
00H: NORM, 01H: USER, 02H: DOOR (high), 03H: DOOR (low),
04H: HALL (high), 05H: HALL (low), 06H: CHECK (high),
07H: CHECK (low), 08H: ATM (high), 09H: ATM (low), 0AH: LOBBY
(high), 0BH: LOBBY (low), 0CH: GATE (high), 0DH: GATE (low),
0EH: PARK (high), 0FH: PARK(low), 10H: DARK (high),
11H: DARK (low), 12H: ELEVATOR, 13H: COUNTER
byte No. bit No.
Motion Detection Settings 1/9
DEH TXD
RXD
FCH TXD
RXD
1st byte 2nd byte 3rd byte 4th byte 5th byte 6th byte