Juniper Networks E-Series User Manual
Page 143
ERX-310 Router Specifications
E-Series Routers
11-7
Telecommunications Certification
•
ACA TS 016-1997
•
CTR13 – Commission Decision of 9 July 1997 on a common technical
regulation for attachment requirements for terminal equipment interface
for connection to 2048 kbit/s digital structured ONP leased lines:
97/521/EC – OJ No. L215 Vol. 40, August 1997
•
CTR24 – Commission Decision of 9 September 1997 on a common
technical regulation for attachment requirements for terminal equipment
interface for connection to 34 Mbit/s digital unstructured and structured
leased lines: 97/639/EC – OJ No. L271 Vol. 40, 3 October 1997
•
FCC PART 68
•
IECS-003 Issue 3 Class A
•
PD7024 – Essential requirements for terminal equipment intended for
connection to unstructured digital leased circuits of the public
telecommunications network using a CCITT recommendation G,703
interface at a rate of 2048 kbit/s with a 75 ohm unbalanced
presentation, 1994
•
RTTE Directive (1999/5/EEC)
a.If the voltage rises above –40 VDC, the system will power off. The system will not power on again until the input
voltage reaches –43 +/– 0.5 VDC.
Table 11-3 ERX-310 router specifications (continued)
Category
Specification