Declaration of conformity, Appendix d – Juniper Networks E-Series User Manual
Page 235
D
Declaration of
Conformity
Declaration of Conformity according to ISO/IEC Guide 22 and EN4514
Manufacturer’s Name:
Juniper Networks, Inc.
Manufacturer’s Address:
Juniper Networks, Inc.
10 Technology Park Drive
Westford, Massachusetts 01886 USA
Declares, that the product(s)
Product Name:
Model Number(s):
Product Options:
Edge Switching Router
ERX-310, ERX-700, ERX-705, ERX-1400, ERX-1440
All Modules
Conforms to the following Product Specifications:
Safety:
IEC 60950-1(2001-10) Ed. 1.0 Information technology equipment - Safety -
Part 1: General requirements
EN60950:2000, 3rd Edition, Safety of Information Technology Equipment
EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements,
and User’s Guide (2001)
EMC:
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
Supplementary Information:
The products herewith comply with the requirements of the
Low Voltage Directive
(73/23/EEC)
, the
EMC Directive (89/336/EEC)
, and the
RTTE Directive
(1999/5/EEC)
, and carry the CE markings accordingly.
Products were tested in a typical configuration.
Westford, MA, May 01, 2003
David H. Schilling
Regulatory Affairs