JVC VN-C625 - Manual (Page 107)

107
5-4 Setting Using the Web Browser (11. Auto Trace Setting)
Auto Trace Setting window:
http://******/autotrace-e.html ("******" represents the URL of VN-C625)
For setting the Auto Trace operation.
1 Press to display the
[Record Start Confirmation Screen].
Memorization of Auto Trace will start
upon clicking
and subsequent
Pan/Tilt as well as Zoom operations will
be stored. (Approximately 30 seconds)
<Record Start Confirmation Screen>
4 For setting image quality.
Upon clicking , the current image
will switch to the image quality setting
during Auto Trace operation.
The same settings will also be applied
during the Auto Pan operation. Use the
[Image Settings] screen to adjust
image quality.
Click
to display the [Image
Settings] screen.
3 To end a recording operation, click
.
The following warning message will
be displayed upon clicking the
button if recording has
not started.
2 For manual Pan/Tilt and Zoom
operation.
[Image Settings] Screen
Notes
Auto Trace will not be memorized
in the following cases. A warning
message will appear.
• During Auto Pan operation
• During Auto Patrol operation
• During Auto Trace operation
C625_p95-p114 05.3.23, 10:19 AM 107