JVC VN-C625 - Manual (Page 80)

80
The "V.Networks Controller" can be used to select a camera as well as record/play
back camera images.
(The controller screen is identical to other V.Networks versions, and there are
functions that cannot be operated from VN-C625)
4-1 Features that Allow Operation Using the V.Networks Controller
Operations (Step 4 Operation Using the V.Networks Controller)
1
CAMERA
Displays the name of the connected camera.
You can also select the connected camera
using
(pull-down menu).
2
Position tabs [1-10], [11-20], [21-30], [31-40],
[41-50], [51-60], [61-70], [71-80], [81-90], and
[91-99]
For assigning the buttons for position moving
(see
3 ).
3
Buttons for position moving
For selecting a position. Assign buttons using
the position tabs in
2 .
4 PLAY
For selecting and playing back video files
saved in
6 . Use also this button to make a
selection when playing back files recorded
during an alarm.
5
STOP
Stops recording.
6
REC
Starts recording when this is selected.
Recorded files are saved under the name as
shown in
1 . During recording, a [Recording]
and [REC] indicator will appear in 1 and on
the displayed image respectively.
7
Snap Shot
For registering and saving only 1 frame of the
displayed image.
4 5 6 7
1
2
3
C625_p80-p94 05.3.17, 10:15 AM 80