JVC VN-C625 - Manual (Page 94)

94
Authorization Level Allowed Access
User Level Still or motion image pages only
Operator Level Web pages except the Settings page
Administrator Level All web pages
Description of Items in [Other Settings]
Item Meaning
! Default Page (Continued)
Available/Not Available
File Name
@ HTTP Port
# NTP Settings
Available/Not Available
Server IP Address
Time Zone
Adjust interval
Set to "Available" when using the default page function and to "Not
Available" when not in use.
Enter the html file name that is to be used as the default page.
To enhance the security level, set the HTTP server port number of VN-
C625 to a value other than the default value of 80. (Specify any value
within the range of 1 to 65535, except for 21 and 554.) Upon changing
the HTTP port number, access the page via the web browser by entering
http://192.168.0.2:12345/ or http://192.168.0.2:12345/index.html.
(When the port number is changed to 12345.) If you have lost track of
the HTTP port number, check using the setup tool supplied.
This is used to perform setting for the NTP (Network Time Protocol) server.
Set to "Available" when using the NTP function and to "Not Available"
when not in use.
Enter the IP address of the NTP server.
The local time will be derived from the Greenwich Time.
An accurate time will be acquired from the NTP server according to
the specified interval to adjust the time to a correct value.
5-4 Setting Using the Web Browser (1. Other Settings) (Continued)
Operations (Step 5 Operating Using a Web Browser)
Note
● Password Protection
VN-C625 is equipped with an access protection feature using a password to restrict browsers
(users) that are connected. The access protection function is divided into 3 levels according
to the authorization levels. Pages that can be accessed (browsed) for each authorization level
are as follows. (Refer to Page 88 for the configuration of web pages in VN-C625.)
Cautions
● Unless a correct Administrator level password is entered, password settings cannot be undone
or changed. Please make sure that you do not forget the password.
● If passwords are only set for the User and Operator levels and not for the Administrator level,
password entry will not be requested.
When the IP address, subnet mask, host name or HTTP port settings are changed, a
confirmation screen indicating "Are you sure to reset to enable the changes?" will appear.
Upon clicking [OK] on this confirmation screen, VN-C625 will be reset internally and settings
such as the IP address will be changed. The IP address before change (factory setting) will be
disabled and connection to VN-C625 will be cut off upon the reset operation.
When the web browser is left unoperated for some time, a message will appear indicating that
connection cannot be established. This is due to the change in the IP address. (The same
message will also appear when the port number is changed.)
C625_p80-p94 05.3.4, 6:04 PM 94