JVC VN-C625 - Manual (Page 79)

79
3-14 Changing Registered Information
The "V.networks Controller" can be used to change information such as the preset
connection method for a camera.
1.
Select [Setting] and [Property].
2.
Perform setting.
1 Change the camera.
Cannot be changed.
4 Set whether to [ON].
2 Recorded files will be stored in the folder
specified here.
3.
When alteration is complete, click .
Caution
Information cannot be changed for a camera that is currently connected.
3 Select the mode for image acquisition.
*For details, refer to Page 56.
C625_p58-p79 05.3.4, 7:07 PM 79