JVC VN-C625 - Manual (Page 46)

46
2-4 Other Settings Using the "VN-C625U Setup Tool" (7. Motion Detection Setting)
1.
Start up the "VN-C625U Setup Tool", select [Alarm Setting] and set [Motion Detection]
to "Available". (
☞
Page 40 "Other Trigger")
2.
Select [Motion Detect] under [VN-C625 Setup Tool].
Settings (Step 2 Network Settings)
For setting the motion detection function, which activates the alarm when there is motion
in the camera image. Perform the following procedure to set area for motion detection.
1
Select "ON" to turn on the motion detection
feature.
2
Set the detection mode.
Fixed area
Set motion detection only for a specific area.
Select a preset position, followed by clicking
. The Motion Detection Setting
screen will be displayed.
(Set values: Home, Position 1to Position 99)
Free area
Motion detection is activated for all areas.
3
For setting the time interval for defining a
motion.
When there is intensive motion throughout the
entire screen, lengthening the time interval will
help to prevent false detection.
(Set value: 0 to 3)
VN-C625_p42-p57_2_24 05.3.4, 6:31 PM 46