JVC VN-C625 - Manual (Page 81)

81
Reduced Screen
CameraA
1
8
3
8 Pan/Tilt button
For adjusting the Pan/Tilt position.
Use Angle Step to set the operating angle for
every single operation of the Pan/Tilt button.
Set the Pan/Tilt operating speed using the
[Pan/Tilt Setting] item under [Setting].
(
☞
Page 71)
9 HOME
For moving the camera to the home position.
0 Zoom button and Zoom bar
For adjusting the zoom position. The digital
zoom function will be activated upon moving
the Zoom button all the way to the Tele-end
(Zoom = 0) and performing the following
procedure.
• Upon clicking the [T] button, digital zoom will
function as follows.
(x1.5 † x2 † x2.5 † x3)
• Upon clicking the [W] button, digital zoom will
function as follows.
(x 3 † x 2.5 † x 2 † x 1.5 † No Digital
Zoom)
#
!
@
8 9
0
Enlarge Display Screen
Pan/Tilt button
Position Moving CAMERA
Compression Mode
!
Angle Step
Sets the degree of angle to move per click when
operating using the Pan/Tilt button in
8 .
Pan/Tilt will operate continuously when this is
set to 0 degrees.
@ Size
For reducing the display size of the [V.Networks
Controller] screen. (See diagram below)
# Pan/Tilt/Zoom Position Indicator
Displays the current Pan/Tilt and Zoom
positions.
Note
For starting and stopping operations of
Auto Pan, Auto Patrol and Auto Trace,
please refer to Page 59.
Caution
Digital zoom can only be applied to the
image currently being displayed. It will not
have any effect on recorded images.
C625_p80-p94 05.3.4, 6:04 PM 81