JVC VN-C625 - Manual (Page 110)

110
Operations (Step 5 Operating Using a Web Browser)
5-4 Setting Using the Web Browser (15. Limit Setting)
Limit Setting window:
http://******/pantiltlimit-e.html ("******" represents the URL of VN-C625)
For setting restrictions on Pan/Tilt operation.
1
2
3
4
5
6
7
8
1
Function
For setting the operation.
When [ON] is selected, the Pan Limit function
will be enabled and panning (horizontal) actions
can be controlled.
2 Current
Displays the current Pan/Tilt/Zoom positions.
3 Pan Limit [Apply] and [Save] Buttons
Applies and saves the Pan Limit settings.
Click
to apply settings and to save the
set values.
Click
to apply settings without saving the
set values. These settings will be cleared upon
turning off the power of VN-C625, and the
previous settings will be restored.
4
PAN/TILT/ZOOM
For manual Pan/Tilt/Zoom operation.
Manual operation is possible only when you
are clicking one of these buttons.
5
Right Side
For adjusting the right limit. Click [Set] to set
the current position as the right limit.
Click [Move] to move to the currently set
positions.
6
Left Side
For adjusting the left limit. Click [Set] to set the
current position as the left limit.
Click [Move] to move to the currently set
positions.
7 TILT Limit
For controlling the tilting (vertical) actions.
When this is set to 10˚, the vertical operating
range of the camera will be between 10˚ and
90˚.
(Set value: OFF, 1 Degree to 10 Degree)
8
Tilt Limit [Apply] and [Save] Buttons
Applies and saves the Tilt Limit settings.
Click
to apply settings and to save the
set values.
Click
to apply settings without saving the
set values. These settings will be cleared upon
turning off the power of VN-C625, and the
previous settings will be restored.
C625_p95-p114 05.3.4, 6:56 PM 110