JVC VN-C625 User Manual
Page 15
15
1
2
3
4
Cap (Upper)
3.
Lead the cable through the cover
Make a slit on the (rubber) cap that is attached
to the cover, followed by leading the cable
through. See diagram on the left on how to
make the slit.
4.
Connect the cable to this camera
Connect cables to the terminal on the ceiling
mount. Connection cables include alarm
signal cable, LAN cable, coaxial cable and that
for the Converter Unit.
1
Connect this cable to devices with alarm
input/output terminals.
2
Connect this cable to a hub or PC.
3
Connect this cable to NTSC monitors.
4
Connect this to a DC12V power supply.
5.
Attach the cover
Attach the cover to the ceiling mount by
following procedure of Step 2 in the reverse
order.
1
Attach the cover upon aligning the hole with
the safety wire mounting hole on the ceiling
mount, followed by turning it in the
clockwise direction.
2
Fasten the cover fastening screw.
C625_p2-24
05.3.4, 6:22 PM
15