JVC VN-C625 - Manual (Page 97)

97
1
Focus
For selecting the mode of focus.
Easy Auto Focus : Focus will be adjusted automatically
upon performing Pan/Tilt or Zoom
operations on the camera.
Manual : Adjust focus manually.
2 Color Level
Adjusts the color level of video signals.
(Set value: -5 to 5)
3
Enhance Level
Sets the contour enhancement which controls
the sharpness on the monitor screen. (Set
value: -5 to 5)
4
Pedestal Level
Sets the pedestal level (black level) of video
signals.
(Set value: -5 to 5)
5 AGC:
Sets the maximum gain of the AGC (Auto Gain
Control), which electronically increases the
gain when the object is under low light
conditions.
(Set value: OFF, 10 dB, 20 dB)
6 Shutter
Sets the speed of the shutter.
(Set value : 1/60, 1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000)
7
Manual Focus Level
For adjusting focus when [Focus] in 1 is set to
"Manual". Focus will be set on a nearer object
when the value decreases, and on a distant
object when the value increases.
(Set Value: 0 to 100)
Click the [One-push AF] button to enable
automatic focus.
8 Iris Mode
For performing setting related to lens iris
adjustment.
Auto : Adjusts iris automatically to the
default state.
Manual : Adjust iris manually.
Auto+ : Adjusts iris automatically to a level
brighter than the default state.
Auto- : Adjusts iris automatically to a level
darker than the default state.
9
White Balance
For setting the white balance, which provides
a color standard.
ATW : Adjusts the white balance automatically
according to the color temperature of
the lighting.
AWC : Adjusts the white balance automatically.
R Gain : Adjusts the hue of R (red) when in
the AWC mode. (Set value: 0 to 100)
B Gain : Adjusts the hue of B (blue) when in
the AWC mode. (Set value: 0 to 100)
0 Average:Peak
Sets the method of exposure detection
according to ratio between the average and
peak values.
(Set value: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5)
!
BLC
Sets the backlight compensation function.
Use this setting when an object appears dark
using the Auto Iris function due to the
presence of a bright light source behind the
object. This function makes it possible to place
an unnecessary light source outside the
photometry area.
(Set value: OFF, Area 1 to Area 4)
Note
For details on settings and set values, refer to "Image Quality Setting" (
☞
Page 64, 65).
C625_p95-p114 05.3.23, 10:16 AM 97