Allow refuse, Append codes, Allow refuse append codes – Siemens HIPATH 8000 User Manual
Page 164
Alphabetical Reference
164
• To hear the configured melody and tone sequence you have to proceed
the according call.
• Editing by phone: Melody/Tone Editor Æ page 161.
Duration
• Value range table:
• Editing by phone: Number Editor Æ page 157.
Allow Refuse
This function allows the administrator to control whether the Refuse call
feature is available on the Phone. The following options are always avail-
able.
• Switch off/Schwitch on
• Continue
Append codes
• The following buttons represent the possibility of the append codes:
– OK
– Clear
– Consult
– Pause
Y User Manual Æ page 130
Permitted values
numeric
Range
Melody: 1 ... 8
Tone sequence:
• 1 (standard melody),
• 2 (single-shot tone),
• 3 (silence)
Default value
Melody: 2, Tone sequence: 2
Permitted values
numeric
Range
0 ... 300 seconds
Default value
60 seconds