Siemens HIPATH 8000 - Manual (Page 49)

Basic Administration
49
Diagnostics menu
The following steps describe the access to the optiPoint 410/
420 economy/economy plus/standard/advance diagnostics menu, starting
from idle state.
1. Select the menu „05=Setup“ by pressing the key > several times.
Confirm with the key : .
2. Select the diagnostics menu by pressing the key k .
3. Enter the administrator password (default: „123456“).
The entry is masked by asterisks „*“.
Confirm with the key
:
.
4. Now the first menu item in the dignostics menu is shown:
You can change the sub-menu by pressing the keys < > or you can
open the menu „01=Display test“ by pressing the key : .
Menu:
05=Setup? >
Enter admin password
Enter admin password
******
Diagnostics
01=Display test?>