Manual configuration – Siemens HIPATH 8000 User Manual
Page 51
Basic Administration
51
Manual Configuration
If your network does not use a DHCP server, you must disable the DHCP
IP assignment manually and specify the phone’s IP address and subnet
mask and the network gateway IP address (default route) for the phone.
In this case the following parameters have to be configured:
If you want to use the Web Interface for further administration (phone con-
figuration by PC) you have to reboot the phone now.
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
DHCP
IP Assignment
- 01=Network
- 01=DHCP IP assign
(switch off)
(not applicable
1
)
1
as long as no IP connection exists
Terminal
IP Address
- 01=Network
- 02=Terminal IP addr.
(change IP address)
(not applicable
*
)
Terminal Mask
- 01=Network
- 03=Terminal mask
(change terminal mask)
(not applicable
*
)
Default Route
- 01=Network
- 04=Default route
(change default route)
(not applicable
*
)