Siemens HIPATH 8000 - Manual (Page 210)

Alphabetical Reference
210
RAM test
• Use this function to test the Æ RAM memory of your optiPoint 410/
420 family S V7.0.
• The results are displayed after the test.
Æ page 95 Æ page 139
Register by terminal name
• If set to "On", the phone will send REGISTER messages which contain
the contents of the Terminal Name field Æ page 223. If set to "Off", the
phone will send REGISTER messages which contain the contents of
the Terminal Number field Æ page 224.
• Editing by phone: Switch Editor Æ page 157.
Æ page 61 Æ page 115
Registration LEDs
• This option determines whether the line LEDs will be lit to show if they
have been registered successfully when the phone starts up. If set to
be On then as each line is successfully registered its LED will be set
ON.
Æ page 69 Æ page 123