Siemens HIPATH 8000 - Manual (Page 212)

Alphabetical Reference
212
Rollover type
The Rollover ring setting will be used if the Keyset is currently active in a
call when an incoming call arrives on a different line.
Selectable rollvover types are:
• 1=No ring
• 2=Alert ring
• 3=Standard ring
• 4=Alert beep
Æ page 69 Æ page 123
Rollover Volume
While you are active on one line of a keyset telephone, the rollover ringing
feature signals additional incoming calls on other lines. The volume can be
set from 1 to 5. For more information see operating manual.
Æ page 69 Æ page 123
ROM test
• Use this function to test the Æ ROM memory of your optiPoint 410/
420 family S V7.0.
• The results are displayed after the test.
Æ page 95 Æ page 139
RTP packet size
Use this function to define the RTP G711/G729 packet size. Options are:
• Auto recognition
• 10 milliseconds
• 20 milliseconds
Æ page 93 Æ page 121
RTP Version
Shows the version of RTP of the optiPoint 410/420 family S V7.0.
Æ page 94
Secondary DNS IP address
See “Primary DNS IP address“.