Siemens HIPATH 8000 - Manual (Page 96)

Extended Administration
96
User-assisted diagnostic tests
These types of diagnostic tests require a local user to confirm the result at
the optiPoint 410/420.
Security settings
Once a particular test has been started, the local user will assume
full control of the test (using the keypad) until the test is terminated.
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
Display test
Æ page 182
>
- 01=Display test
- User-assisted diagnostic tests
- Display test
LED test
Æ page 196
>
- 02=LED test
- User-assisted diagnostic tests
- LED test
Key test
Æ page 193
>
- 03=Key test
- User-assisted diagnostic tests
- Key test
Audio loop test
Æ page 165
>
- 04=Audio loop
- User-assisted diagnostic tests
- Audio loop test
Line monitor
Æ page 198
>
- 08=Line monitor
- User-assisted diagnostic tests
- Line monitor
Key Label Test
Æ page 213
>
- 13=Key Label Test
- User-assisted diagnostic tests
- Self Labelling keys test
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
Payload Security
allowed
Æ page 206
- 02=System
- 47=Payload Security All
(Switch off/on) - Security Settings
- Payload Security allowed
(mark as allowed)
Connectivity
check interval
Æ page 173
- 02=System
- 48=Conn.Check Interval
(enter value) - Security Settings
- Connectivity check interval
(enter value)
SIP Server
Validate
Æ page 216
- 02=System
- 49=SIP Server Validate
(Switch off/on) - Security Settings
- SIP server validation
(mark as enabled)