Compression encoding, Conference factory uri, Config dls port – Siemens HIPATH 8000 User Manual
Page 170: Configuration download filename, Config server address, Cfg dl filename, Compression, Microphone
Alphabetical Reference
170
Compression encoding
• Use this function to select one of the two compression encodings that
should be used if the compressed audio mode was selected, see Au-
• Selectable values: G729 and G723.
Conference factory URI
This field identifies the server used for the system based conference. En-
ter the URI of the conference server <conf@<SIP Server IP> (e. g.
[email protected] or Domain Name). Reboot is required. This URIs is
only effective with Sylantro server.
Config DLS Port
If Deployment service is used, enter the port address of the server.
Configuration download filename
• Specify the name of the file containing the configuration data of the
optiPoint 410/420 family S V7.0.
• The file must exist in a defined directory on the Æ FTP server
(Æ Download server IP address or DNS name, Æ FTP path).
• Value range table:
• Editing by phone: Text Editor Æ page 155.
Config Server address
Specify the address of the Server where to upload the phones configura-
tion file.
Permitted values
alphanumeric
Length max.
92 digits
Default value
opti410c
The configuration file is in Unix text format. Editing the document
might change the formatting.