Siemens HIPATH 8000 - Manual (Page 68)

Extended Administration
68
Multiline
Line key configuration
In line overview menu you can configure lines and an assign lines to keys.
It suffices to assign one line to a key for to go in multiline operation.
Parameter
Phone path
(Menu Æ page 148)
Web Interface path
(Menu Æ page 110)
Line
Æ page 196
(not applicable) - Funcktion keys
- Phone
or
- Key module
- Select a key with EDIT
a configuration dialog appears
- Select:line
(A key with line is ready for con-
figuring)
Key Label
Æ page 192
(not applicable) Line key configuration dialog
- Key Label
(enter a name for the line key –
only with optiPoint 420)
Address of
record
Æ page 199
(not applicable) Line key configuration dialog
- Address of record
(enter e.g. phone number)
Realm
Æ page 201 (not applicable) Line key configuration dialog
- Realm
(enter IP address)
Primary line
Æ page 201 (not applicable) Line key configuration dialog
- Primary line
(mark as primary if required)
Ring
Æ page 201 - 02=System
- 28=Keyset
- 01=Line
select a line
- 2=Ringer setting
(Read only) Line key configuration dialog
- Ring
(enable/disable)