Siemens HIPATH 8000 - Manual (Page 53)

Basic Administration
53
Step by Step
optiPoint 410 entry
Configuration using DHCP Server
The optiPoint 410/420 is factory-configured to have an
IP address automatically assigned to it by the DHCP
server as soon as it’s connected to LAN.
If your network use a DHCP server, the telephone will
try to get its IP Address, IP Address Mask, SIP Address-
es (server, gateway, registrar), SNTP Server Address
Configuration Download Server Address and Time Off-
set from the DHCP server (completely list see
Æ page 38).
In this case the following parameters have to be config-
ured using the Web Interface Administrator Menu.
The Authentication is done via digital Certificates.
For detailed informationen refer to the IEEE
802.1x Configuration Management Administra-
tion Manual.
Parameter
Web Interface path
(Menu Æ page 110)
Terminal Number
Æ page 224 - SIP environment
- Terminal number
(enter terminal number)
SIP User ID
Æ page 218 - SIP environment
- SIP user ID
(enter ID)
SIP Password
Æ page 215
- SIP environment
- New/Confirm SIP password
(enter/re-enter password)
Language WBM user interface