Siemens HiPath Xpressions Unified Messaging - Manual (Page 192)

Mailbox Processing on the Telephone and the Voice Mail Service Voicemail
A31003-S2330-B690-2-7619, January 2003
3-32 HiPath Xpressions V3.0, User Manual
Operating your Mailbox with PhoneMail
3.2.5 Connection
You can call the switch or another user while you are connected to a mailbox. To do this, you
must select the main menu of the mailbox. To call a user while you are connected to the mail-
box:
You can also set up a connection to external users, provided your system administrator has en-
abled this option. To do this, dial the trunk seizure code (normally 0) in front of the telephone
number.
After listening to a new or old message, you can enter 70 to connect directly to the originator
of the message (see Section 3.2.3.2, “Options available after messages have been heard”).
7 push 7 in the main menu (see Section 3.2.3, “Options in the Main
Menu”).
You now have the following options:
0 Call user: push 0 or
# Cancel and return to the main menu or
6 Terminate the mailbox connection
(see also Section 3.1.9.4, “Terminating the Connection”).
Once you have pushed 0, the following options are available:
# Call the switch: push the pound key or
# Enter the required user number and conclude the entry with the pound
key.
* # Enter the name of the relevant user by selecting letters that are as-
signed to the number keys and conclude your entries by pushing the
pound key.