Siemens HiPath Xpressions Unified Messaging - Manual (Page 239)

vms.fm
A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual
3-79
For internal use only Mailbox Processing on the Telephone and the Voice Mail Service
Operating your Mailbox using VMS
Direct connection to the attendant console (optional, if configured)
Set up connection to an internal user/device of your choice
The following options are available for setting up a connection to an internal user/device of your
choice:
* Leave language of user prompts unchanged:
Push the star key.
Enter the code number for the required language:
Enter the code number for the required language.
9 Set up connection to the attendant console:
Push 9.
0 2 Open connection menu:
Push 0 and then push 2.
* Select a user/device:
Enter the recipient’s call number and push the star key to conclude the
entry.
# If the entry was incorrect: Enter the call number of the user/device:
Push the pound key. You can resume the process of entering a call num-
ber immediately afterwards.
or
0 * Cancel the process and return to the main menu:
Push 0 and then push the star key.