Siemens HiPath Xpressions Unified Messaging - Manual (Page 232)

Mailbox Processing on the Telephone and the Voice Mail Service For internal use only
A31003-S2330-B690-2-7619, January 2003
3-72 HiPath Xpressions V3.0, User Manual
vms.fm
Operating your Mailbox using VMS
Configure "User outcall" notification / SMS notification
Please note that a special privilege may be required for external call numbers. The notification
feature is only authorized if the user has been assigned this privilege. Please note also that the
entered start and end time (validity period) applies to all working days of the week.
8 Select special functions in main menu:
Push 8.
5 Select notification feature:
Push 5.
1 Configure "User outcall" notification:
Push 1.
or
2 Configure SMS notification:
Push 2.
2 Define destination number:
Push 2.
* Enter destination number:
Enter the relevant number and push the star key to conclude the entry.
# If the entry was incorrect: delete the number entered:
Push the pound key. You can resume the process of entering the desti-
nation number immediately afterwards.
0 * Finish and return to main menu:
Push 0 and then push the star key.
4 Select start time entry:
Push 4.
* Enter the start time for the notification:
Enter the start time for the notification and push the star key to conclude
the entry. The input format for the definition of the start time allows the
following inputs to be made:
Input format
[hhmm] four-digit input
#
Ex.: "0700" notification start at 7 hours 00 minutes
Delete input and make new selection: Push the pound key.
0 * Cancel the entire process and return to the main menu:
Push 0 and then push the star key.
6 Select end time entry:
Push 6.