Siemens HiPath Xpressions Unified Messaging - Manual (Page 41)

A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual
2-25
Mailbox Processing on the PC and the E-Mail Service
Outlook 2002 in Exchange Operation
The "MRS Address" type is only available if the HiPath Xpressions Exchange Connector is
installed. If this connector is not installed on your system, you can add the recipient to the
Internet address list using the syntax described below. Information on how to send an SMS
message using Netscape 4x can be found in Section 5.2.
4. Select the MRS - Gateway Address tab in the dialog box displayed above.
5. In the Display box, assign a meaningful name for the address book entry. You can use this
name to contact the address defined in the next box.
6. Enter the address of the recipient in the Address box.
Please observe the following rules when entering the address:
– Enter the prefix MRS:SMS/ at the beginning of the address.
– Now enter the telephone number of the mobile phone user in the full international format.
In the example above, +49 stands for Germany, 171 is the area code for the D1 network
and 7654321 is the user’s number (the + sign can be omitted).
Send Options are not relevant to the address type MRS Address.
You can enter other recipient data in the normal way in the tabs in the New MRS Address
Properties dialog box.
You can now click the To... button and select the entry from the address book when you wish
to create a new message. The name that you assigned in the Display box is copied to the ad-
dress line.