SRS Labs SR850 - Manual (Page 147)

5-37
Math Menu
Pressing any key to continue will remove the parameter window while
leaving the best fit curve on the display. Pressing another key to continue
will remove the curve and restore the graph to normal.
Left and Right Limit The Left and Right Limit functions set the left and right limits of the fit
region. The default positions of the limits are the the left and right edges
of the graph. To move a limit, move the cursor using the knob to the
desired location of the limit (press [CURSOR] to activate the cursor).
Pressing the Left or Right Limit key will set the limit to the cursor position.
The Limits are set each time a limit key is pressed.
The limits are displayed as heavy dashed vertical lines as shown below.
center = 0.0
±
50.00 e-3 V
10 S /div
Trace 2
Y 7.000 S 36.100 e-3
0.000 S
Full Scale = 100 mV
Dyn Reserve = 23 dB 100 mS
12 dB/oct Line 2xLin AC A
Syncro
Fr= 100.00 Hz Intrnl Done
Harmonic= 1 LOC LOCK
Line
Type of Fit
View
Limits
Exp
Gauss
Do Fit:
Params:
Left:
Right:
Return:
Return The Return key will return to the main Math menu. Re-entering the Fit
menu and using the View Parameters function will re-display the most
recent fit.
Limit Markers