3 remote programming detailed command list – SRS Labs SR850 User Manual

Page 179

Advertising
background image

6-3

Remote Programming

DETAILED COMMAND LIST

The four letter mnemonic in each command sequence specifies the command. The rest of the sequence con-
sists of parameters. Multiple parameters are separated by commas. Parameters shown in { } are optional or
may be queried while those not in { } are required. Commands that may be queried have a question mark in
parentheses (?) after the mnemonic. Commands that may ONLY be queried have a ? after the mnemonic.
Commands that MAY NOT be queried have no ?. Do not send ( ) or { } as part of the command.

The variables are defined as follows.

i, j, k, l, m

integers

x, y, z

real numbers

f

frequency

s

string

All numeric variables may be expressed in integer, floating point or exponential formats ( i.e., the number five
can be either 5, 5.0, or .5E1). Strings are sent as a sequence of ASCII characters.

Remember!

All responses are directed to the interface selected in the Setup Communications Output To RS232/GPIB
function, regardless of which interface received the query.

Use the OUTX command to select the

correct interface at the beginning of every program.

Advertising