22 performance tests – SRS Labs SR850 User Manual

Page 240

Advertising
background image

7-22

Performance Tests

c) For each output voltage in the table below, repeat steps 5d and 5e.

Output Voltages

-10.000

-5.000

0.000
5.000

10.000

d) Press

<Voltage>

Enter the voltage from the table.

e) Record the DVM reading.

6) Press

[DISPLAY/SCALE]

<Monitor>

Select Input/Output.

[AUX OUTPUTS]

<1,2,3,4>

Select Aux Out 1.

7) For each Aux Input (1,2,3 and 4), repeat steps 7a through 7d.

a) Connect Aux Out 1 to Aux Input 1,2,3 or 4.

b) For each output voltage in the table above, repeat steps 7c and 7d.

c) Press

<Voltage>

Enter the voltage from the table.

d) Record the Aux Input value from the monitor display at the top of the screen.

8) This completes the DC outputs and inputs test. Enter the results of this test in the test record at the

end of this section.

Advertising