SRS Labs SR850 - Manual (Page 42)

2-30
Press <Catalog>
Use the knob to select the settings file which
you just saved.
6. Press <Settings Recall>
Press [GAIN/TC]
Display the disk catalog listing. Note that settings
files have the file type SET.
When the disk catalog is displayed, the knob high-
lights a file. Use the knob to choose the file TEST1
to recall.
This recalls the settings from the file TEST1. The
lock-in settings are changed to those stored in
TEST1.
The sensitivity and time constant should be the
same as those in effect when you created the file.
Settings files store the lock-in state (sensitivity,
time constant, reference, etc.), the display setup
(display format, type, trace parameters, etc.) as
well as the system setup (plotter, printer, interface
settings, etc.).
The Disk Drive