SRS Labs SR850 - Manual (Page 197)

6-21
Remote Programming
PRINT and PLOT COMMANDS
PRSC The PRSC command will print the screen display to a printer attached to
the rear panel parallel printer port. This function is the same as the
[PRINT] key. The printer type needs to be selected before using the
PRSC command.
PALL The PALL command generates a plot of the data displays. Each feature
uses the pen assigned in the Setup Plotter menu.
PTRC The PTRC command plots only the data trace(s).
PCUR The PCUR command plots only the cursor(s) if they are on.