SRS Labs SR850 - Manual (Page 171)

5-61
System Setup Menu
Plot All The Plot All key generates a plot of the entire display, including the scale
and marker information. In single display format only the full screen
graph is plotted. In dual trace mode both displays are plotted. Each fea-
ture uses the pen assigned in the Plotter Settings submenu in the
System Setup menu. The marker is plotted only if it is presently
displayed.
Plot Trace The Plot Trace key plots only the data trace(s). This allows multiple data
traces to be plotted on a single sheet. Traces may be plotted in different
colors by changing pen definitions or pens between plots. In single dis-
play format, the full screen graph is plotted. In dual trace mode, both dis-
plays are plotted.
Plot Cursor The Plot Cursor key plots the cursor if the cursor is presently displayed
on the screen. Use the Cursor Setup menu to turn the cursor display on
and off. The cursor information is plotted next to the cursor. This is useful
when a trace has multiple peaks which need to be marked on the plot.
First Plot All with the cursor at one location, then move the cursor and
Plot Cursor.
Plot Abort Pressing this key aborts the plot.
Return The Return key will return to the main System Setup menu.
Abort
Plot
Cursor:
Trace:
All:
Return:
Plot:
Abort Plot
Plot
Plot All
Plot Trace
Plot Cursor
Return
SYSTEM
SETUP
Plot
The Plot submenu is used to plot the screen display to an HPGL compat-
ible plotter. Use the Plotter Settings menu to configure the plotter
interface.
5-61