Sanyo PLC-XL40 - Manual (Page 10)

10
Part Names and Functions
Top Control
ON
- OFF
POWER
KEYST
ONE
INPUT
WARNING LAMP REPLACE
MENU
- VOLUME
+ VOLUME
SELECT
q w e t u i
o
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end (pp.56, 62).
y WARNING indicator
–Lights red light when the projector detects an
abnormal condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.53, 62).
w POWER ON–OFF button
Turn the projector on or off (pp.19–20).
r POWER indicator
–Lights red when the projector is in stand-by
mode.
–Lights green during operations.
–Blinks green in the Power management mode
(pp.45, 62).
t INPUT button
Select input source (pp.26, 35, 36).
e MENU button
Open or close the On-Screen Menu (p.21).
o POINT ( ed7 8 ) buttons
–Select an item or adjust the value in the On-
Screen Menu (p.21).
–Pan the image in Digital zoom + mode (p.34).
–Adjust the volume level (Point
7 8 buttons)
(p.24).
q SELECT button
–Execute the selected item (p.21).
–Expand or compress the image in Digital zoom
mode (p.34).
i KEYSTONE button
Correct the keystone distortion (pp.23, 42).
r y