Sanyo PLC-XL40 - Manual (Page 38)

38
Video Input
Use the MENU button to display the On-Screen Menu.
Press the Point
7 8 buttons to move the red frame
pointer to the Image Select Menu icon.
1
2 Use the Point ed buttons to move the red frame
pointer to the desired level and then press the SELECT
button.
Move the red frame pointer to
the desired image level and
press the SELECT button.
The image level being selected.
Image Select Menu
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
Blackboard (Green)
User preset image in the Image Adjust Menu (pp.39–40).
Image1–4
Image Select
Menu icon
Select an image level from among Dynamic, Standard,
Cinema, Blackboard (Green), Image 1, Image 2, Image 3,
and Image 4 with the IMAGE button on the remote control.
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
Blackboard(Green)
User preset image in the Image Adjust Menu (pp.39–40).
Image 1–4
IMAGE button
Dynamic
Cinema
Image 1
Image 2
Image 3
Image 4
Image Level Selection
Direct Operation
Menu Operation
For viewing the image projected on a blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
For viewing the image projected on a Blackboard. See
above for further description.
Blackboard (Green)
For viewing picture in a bright room.
Dynamic
For viewing pictures in a bright room.
Dynamic
Standard
Remote Control
IMAGE
button