Sanyo PLC-XL40 - Manual (Page 44)

44
Logo PIN code lock Dialog Box
Quit
Pointer
Enter a Logo PIN code
Use the Point 7 8 buttons to select a number and press
the SELECT button to fix the number; the number
changes to “
✳.” If you fixed an incorrect number, move
the pointer to “Set” or “Clear” once by pressing the
Point
d button, then return to “Logo PIN code.” Enter
the correct number.
Repeat this step to complete entering a four-digit
number.
When the four-digit number is fixed, the pointer
automatically moves to “Set.” Press the SELECT button
so that you can change the Logo PIN code lock setting.
If you entered an incorrect Logo PIN code, “Logo PIN
code,” the numbers (
✳✳✳✳) will turn red and disappear.
Enter the Logo PIN code all over again.
After a correct Logo PIN code is entered, the
following dialog box appears.
Select On/Off by pressing the Point 7 8 buttons
or change the Logo PIN code. Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Select “Logo PIN code change” with the Point
d button and press the SELECT button. Set a new Logo
PIN code.
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer
change the Logo PIN code setting. For details on PIN
code setting, refer to relevant instructions of the PIN
code lock function on pages 47–48.
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off .......the screen logo can be changed freely from
the Logo select menu (p.43).
On .......the screen logo cannot be changed without
the Logo PIN code.
If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set “4321” at the factory.
Logo PIN code lock
Setting
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
TAKE A MEMO AND KEEP IT SECURELY. SHOULD
THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE
LOGO PIN CODE SETTING CAN NO LONGER BE
CHANGED.