Sanyo PLC-XL40 - Manual (Page 33)

33
Computer Input
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select “Store” and press the
SELECT button. The Image Level Menu appears. Use the
Point
ed buttons to choose one of the four image level
and press the SELECT button. A confirmation box appears
and then select “Yes.”
The stored data can be called up by selecting “Image” in
the Image Level Selection on page 31.
Move the red frame
pointer to the desired
image level (from Image
1 to 4) and then press
the SELECT button.
A confirmation
box appears, then
select “Yes.”
Store item
Press the SELECT button
at this item to store the
adjusted data.
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu. Use the Point
7 8 buttons to move the red
frame pointer to the Screen Menu icon.
1
Move the red frame pointer
to the function and press
the SELECT button.
Use the Point ed buttons and move the red frame
pointer to the desired function and then press the
SELECT button.
2
Screen Menu
Screen Menu icon
Screen Size Adjustment
Wide
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector automatically switches to the panning mode. Use
the Point
ed7 8 buttons to pan the image. When
adjusted, the arrows turn red. When reached to the
correction limit, the arrows disappear.
Provide the image to fit wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used to provide the squeezed video signal at 16:9.
Full screen
Provide the full screen image.
✔
Notes:
•This projector cannot display any resolution
higher than 1600 x 1200. If your computer’s
resolution is higher than that, lower the
resolution before connecting to the projector.
•The image data other than 1024 x 768 is
modified to fit the screen size in initial mode.
•True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.27).