Sanyo PLC-XL40 - Manual (Page 14)

14
✔
Notes:
•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.
•The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get
the best image.
•All measurements are approximate and may vary from the actual sizes.
65”
70”
75”
80”
60”
A
B
3.38’ (1.03 m)
3.15’ (0.96 m)
2.92’ (0.89 m)
2.72’ (0.83 m)
A : B = 10 : 1.2
Screen Size
(W x H) mm
4:3 aspect ratio
Throw distance
60”
1219 x 914
2.49’ (0.76 m)
65”
1321 x 991
2.72’ (0.83 m)
70”
1422 x 1067
2.92’ (0.89 m)
75”
1524 x 1143
3.15’ (0.96 m)
80”
1626 x 1219
3.38’ (1.03 m)
(Inch Diagonal)
2.49’ (0.76 m)
For projector positioning, see the figures below.
The projector should be set perpendicularly to the plane of the screen.
(Center)
Projection angle can be adjusted up to 10.0 degrees with
the adjustable feet.
Lift the front of the projector and pull the feet lock
latches on both sides of the projector upward. 1
Adjustable Feet
Feet Lock Latches
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt. 2
To retract the adjustable feet, lift the front of the
projector and pull and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected by menu operation (pp.23, 42). 3
Adjustable Feet
Positioning the Projector
Installation